The ConEXTRA® shelving system, distributed exclusively in most of Florida by Coletti International, was designed to create shelves inside containers in virtually any length... in only minutes! Our system is so simple and light that anyone can install it!

ConEXTRA® consists of custom brackets made of steel that can be easily mounted inside and outside your containers. We recommend the use of construction grade lumber boards or galvanized rigid conduit pipes with the brackets to ensure that your load is secure.

PRODUCTS:

Two Shelf Brackets : A two-shelf unit that uses two boards of:
2" (height) x 8" (width) x desired length, per shelf. ITEM CODE: 2208
2" (height) x 10" (width) x desired length, per shelf. ITEM CODE: 2210
2" (height) x 12" (width) x desired length, per shelf. ITEM CODE: 2212

Three Shelf Brackets: A three-shelf unit that uses two boards of:
2" (height) x 8" (width) x desired length, per shelf. ITEM CODE: 3208
2" (height) x 10" (width) x desired length, per shelf. ITEM CODE: 3210
2" (height) x 12" (width) x desired length, per shelf. ITEM CODE: 3212

File Storage Box Bracket: A three-shelf unit designed specifically to organize archived file boxes efficiently within containers. This shelf will accommodate full sized bankers' boxes. This unit uses two boards of 2" (height) x 10" (width) per shelf. ITEM CODE: SB3210FSS

Four Shelf Bracket: A four-shelf unit that uses two boards of 2" (height) x 10" (width) per shelf. ITEM CODE: 4210

Note: Each shelf bracket has a load rating capacity that results in stronger shelves. For example: if you use two brackets with a load rate of 1100 lbs, you get a 2200 lbs load capacity shelf; three brackets of 1100 lbs, you get a 3300 lbs load capacity shelf; and so on.

Four Pipe Rack Bracket: Four support arms, mounted at a 30° angle for high volume capability. It includes bracing on each arm to increase load capability and a roll stop for enhanced safety. This unit maximizes the use of wall space and increases the useable floor space below the rack to approximately 24".
ITEM CODE: 4000C

Five Pipe Rack Bracket: Five support arms, mounted at a 30° angle for high volume capability. It includes bracing on each arm to increase load capability and a roll stop for enhanced safety. This unit maximizes the use of wall space and increases the useable floor space below the rack to approximately 8"".
ITEM CODE: 5000C

Apparel Bracket: A two-arm bracket that uses standard 1" x 10' GRC (galvanized rigid conduit) pipes as support rod from which apparel may be stored two layers high. This bracket was designed to add further organization and storage options for the retail market. ITEM CODE: 2000A

Bike Bracket: A two-arm bracket that uses standard 1" x 10' GRC (galvanized rigid conduit) pipes as support rod from which bicycles may be suspended, using our accessory hook (BSH). Different configurations can be set up to accept apparel and bikes easily within one container, along the same wall.
ITEM CODE: 2000B

Accessories

Bicycle Hook	External Bracket Mount for Pipe Bracket	Secure Strap
Item code: BSH	Item code: EBM	Item code: SS66